Posted by satchmo on Mon Aug 22nd at 3:52pm 2005
Once the connection is lost, there are several ways to bring it back. One way is to open the Network panel and disable the wireless connection and then re-enable it. The other is to pull the USB wireless receiver from the port and re-inserting it. Another way is to restart the computer.
Does anyone else experience the same problem? I've asked tons of people, and many people have the same problem, but no one knows how to stop it from happening.
Any tips would be greatly appreciated. Thanks in advance.
satchmo
member
2077 posts
396 snarkmarks
Registered: Nov 24th 2004
Location: Los Angeles, U.S.

Occupation: pediatrician
Posted by Nickelplate on Mon Aug 22nd at 4:33pm 2005
hey, how far away is the router from the adapter?
If it's too close, you'll overmodulate and error out all the time. If its through some walls, you'll need a high-gain antenna on your router.
Nickelplate
member
2770 posts
327 snarkmarks
Registered: Nov 23rd 2004
Location: US

Occupation: Prince of Pleasure
http://www.dimebowl.com
Posted by satchmo on Mon Aug 22nd at 5:08pm 2005
It's about twenty feet (six meters) away, and only through one wall. I didn't have this problem with my old computer with the same setup, but once I connected the adapter to my new computer, the problem starts.
Sometimes I don't have any disconnect the entire day, but sometimes I get it a few times a day. It's not a grave problem, but it's annoying enough.
I may have to just live and cope with it.
satchmo
member
2077 posts
396 snarkmarks
Registered: Nov 24th 2004
Location: Los Angeles, U.S.

Occupation: pediatrician
Posted by azelito on Mon Aug 22nd at 6:17pm 2005
azelito
member
570 posts
127 snarkmarks
Registered: Aug 8th 2002
Location: Sweden

Occupation: Wierdness
Posted by satchmo on Mon Aug 22nd at 6:19pm 2005
I didn't try that, but I did liberally utilize profanity. It didn't work though.
Perhaps I should curse in a different language.
satchmo
member
2077 posts
396 snarkmarks
Registered: Nov 24th 2004
Location: Los Angeles, U.S.

Occupation: pediatrician
Posted by ReNo on Mon Aug 22nd at 6:22pm 2005
ReNo
member
5457 posts
933 snarkmarks
Registered: Aug 22nd 2001
Location: Scotland
Occupation: Level Designer
Posted by satchmo on Mon Aug 22nd at 6:24pm 2005
satchmo
member
2077 posts
396 snarkmarks
Registered: Nov 24th 2004
Location: Los Angeles, U.S.

Occupation: pediatrician
Posted by Loco on Mon Aug 22nd at 6:27pm 2005
This worries me a little as I've just ordered a Netgear modem/router - namely the DG834G. Which router have you got?
Posted by Crono on Mon Aug 22nd at 6:28pm 2005
It sounds like you just have a weak signal, for whatever reason. And no, signals aren't constant, so it doesn't matter if it never happened before. Although, it could be a software issue, but I doubt that if it works at all.
You can strengthen the signal by buying signal enhancers, which will pick up the signal from the router and boost it ... like a cell phone tower, if you want to think of it like that.
The downside of that is, someone could sit outside your place and tap your signal.
The other option, which is more complicated, is to read up on your router and figure out how to use a lower channel. Like 1 or 2, I think. I know all wireless is default on channel 11. You can also set up your computer to not search for a signal. That would mean you have to connect manually (clicking an icon). But, what that will do is stop your card from disconnecting from your router and connecting to a stronger signal ... which is someone else's. (This happens a lot)
I'm pretty sure it's the signal, because it can be reinitialized manually (restarting any of the functionalities does this)
As for the specifics of how to do all these things: you have to research your router ... it will tell you how, most likely, in the manual. Just trying to point you in the right direction. Hope it helps.
Posted by satchmo on Mon Aug 22nd at 6:36pm 2005
Thanks Crono. I've tried all that. The router is set to use channel 6 (because one of my neighbors is using channel 11, and another is set to channel 1).
It's quite frustrating, because I actually have a PCI receiver card installed in my desktop, but I can't use it because it can never connect to the router. It's just dead weight in my computer right now.
satchmo
member
2077 posts
396 snarkmarks
Registered: Nov 24th 2004
Location: Los Angeles, U.S.

Occupation: pediatrician
Posted by Crono on Mon Aug 22nd at 6:52pm 2005
I guess a way to check would be to move the computer out so the receiver can be "pointed" directly in the direction of the router.
Some other things are just em signals ... does the wall have many wires in it? Is it next to a tv? Another computer?
If it's none of these. I'm not sure. Look for issues with the card.
Posted by ReNo on Mon Aug 22nd at 7:23pm 2005
ReNo
member
5457 posts
933 snarkmarks
Registered: Aug 22nd 2001
Location: Scotland
Occupation: Level Designer
Posted by Nickelplate on Mon Aug 22nd at 7:52pm 2005
Nickelplate
member
2770 posts
327 snarkmarks
Registered: Nov 23rd 2004
Location: US

Occupation: Prince of Pleasure
http://www.dimebowl.com
Posted by Tracer Bullet on Mon Aug 22nd at 8:14pm 2005
I have both a linksys router and adapter for my laptop. The only problem I have ever had is that about once every two months the router needs to be reset.
Do you have multiple computers in the house? it is possible that the DHCP table is getting confused and assigning the same IP to two computers. I've seen this happen, but usualy only when a new computer is entering the network. You might try using static routing and see if that helps.
Tracer Bullet
member
2271 posts
367 snarkmarks
Registered: May 22nd 2003
Location: Seattle WA, USA

Occupation: Graduate Student (Ph.D)
They aren?t really good for anything, but you can't help but laugh when one tumbles down the stairs.
Posted by satchmo on Mon Aug 22nd at 8:25pm 2005
satchmo
member
2077 posts
396 snarkmarks
Registered: Nov 24th 2004
Location: Los Angeles, U.S.

Occupation: pediatrician
Posted by Dred_furst on Tue Aug 23rd at 11:16pm 2005
Posted by Myrk- on Tue Aug 23rd at 11:23pm 2005
Myrk-
member
2299 posts
385 snarkmarks
Registered: Feb 12th 2002
Location: Plymouth, UK

Occupation: CAD & Graphics Technician
Posted by wil5on on Wed Aug 24th at 6:12am 2005
A cable and card cost less than a wireless card as far as I'm aware (most boards have the card inbuilt anyway nowadays). A 10/100 switch costs far less than a wireless router. Guess what I use. Even if I had a laptop I wouldnt go wireless.
wil5on
member
1733 posts
323 snarkmarks
Registered: Dec 12th 2003
Location: Adelaide

Occupation: Mapper
- My yr11 Economics teacher
Posted by Junkyard God on Wed Aug 24th at 8:42am 2005
sure it's wireless and not just 'wire not included in the box' ??
we had that -_- " SRC="images/smiles/icon_biggrin.gif"> spent aages tryign to figure out wtf to do!
" SRC="images/smiles/icon_smile.gif">
Junkyard God
member
654 posts
73 snarkmarks
Registered: Oct 27th 2004
Location: The Nether Regions
Occupation: Stoner/mucisian/level design
Posted by satchmo on Wed Aug 24th at 4:20pm 2005
It works great. And now I can deathmatch without lag.
It's the little things that make life so worth living.
satchmo
member
2077 posts
396 snarkmarks
Registered: Nov 24th 2004
Location: Los Angeles, U.S.

Occupation: pediatrician
Snarkpit v6.1.0 created this page in 0.0075 seconds.


