Snarkpit Forum Index » Source engine editing » CS:S crashes after I try to load my map
CS:S crashes after I try to load my map
1
Post Reply
Quote
 Re: CS:S crashes after I try to load my map
Posted by RogerGargantua on Wed Feb 11th at 9:50am 2009

Hello all,

I've tried searching for answers on google and several other forums about this problem but couldnt find a clue.
I thought starting a topic here would be good since I feel here's more experienced Hammer users.
Here's the situation:

I compile my map and everything in compile goes fine. No errors, etc.
So I start up CS:S and in console I try to load my map : map cs_testmap
Then it crashes back to Windows (XP btw) and says that HL2 has made an unexpected error, bla bla.
Then I tried starting up parts of my map by using the Cordon Tool to see where the problem lies. I divided my map into three sections and I tested all of them. It all works fine!! Good compile and good start up.

This left me wondering that maybe my map is too big? And perhaps there is a maximum of brushes you can use? And how can check this in the compile log?
If this is not the case, could anyone else tell me a solution or have suggestions?
(perhaps optimisation with areaportals will work?)

I hope to get going with my map soon! smiley

- Gargantua





Quote
 Re: CS:S crashes after I try to load my map
Posted by haymaker on Wed Feb 11th at 3:14pm 2009

first thing i would suggest is uncheck the 'run game after compile' box, that is known to cause problems. Other than that perhaps you have too much of something so that the full compile overloads a server setting?...

This seems to be an issue that's getting more common recently, there's a few threads on the steam sdk forums like it



Quote
 Re: CS:S crashes after I try to load my map
Posted by RogerGargantua on Wed Feb 11th at 6:05pm 2009

I have the "Run game after compile" always unchecked. Good tip about Steam SDK forums, I go search for them. I really hope to find an answer there....my map is like 75% finished and it would be a waste if I cant complete it for some silly reason.
Thanks for replying!



Quote
 Re: CS:S crashes after I try to load my map
Posted by Le Chief on Thu Feb 12th at 9:03am 2009

Quoting RogerGargantua

Then I tried starting up parts of my map by using the Cordon Tool to see where the problem lies.


Hmm, instead of that, try putting a huge non hollowed box over parts of the level you want to hide. Try doing that in the three proportions as you did before, compiling each time and tell us if you still get the error.


Aaron's Stuff



Quote
 Re: CS:S crashes after I try to load my map
Posted by RogerGargantua on Thu Feb 12th at 12:14pm 2009

Thx 4 replying, Aaron_da_killa
I will try that later.

Well I tried to following today:
- Removed the old BSP
- did a new compile
- started up CS with the +condump command

This is what condump000.txt gives me:

maxplayers set to 32
Heap: 256.00 Mb
Parsed 359 text messages
Couldn't find custom font file 'resource/HL2EP2.ttf'
Couldn't find custom font file 'materials/vgui/fonts/buttons_32.vbf'
execing config.cfg
Can't use cheat cvar cl_upspeed in multiplayer, unless the server has sv_cheats set to 1.
Can't use cheat cvar cl_forwardspeed in multiplayer, unless the server has sv_cheats set to 1.
Can't use cheat cvar cl_backspeed in multiplayer, unless the server has sv_cheats set to 1.
Can't use cheat cvar dsp_dist_mx in multiplayer, unless the server has sv_cheats set to 1.
Can't use cheat cvar dsp_dist_min in multiplayer, unless the server has sv_cheats set to 1.
Can't use cheat cvar r_ambientfraction in multiplayer, unless the server has sv_cheats set to 1.
2 CPUs, Frequency: 2.3 Ghz, Features: GenuineIntel SSE SSE2 MMX RDTSC CMOV FCMOV
execing valve.rc

To me, I dont get these commands except I understand a bit about the font files but i dont get it why they are missing? And I didnt use a custom font file ? So whats up with that?



As for my compile log, its posted below. I marked the errors with BOLD. But according to a compile error list these are considered to be light errors and not affecting the map or gameplay.

** Executing...
** Command: "c:program filesvalvesteamsteamappsrogergargantuasources dkbinep1binvbsp.exe"
** Parameters: -game "c:program filesvalvesteamsteamappsrogergargantuacounter-strike sourcecstrike" "C:Program FilesValveSteamSteamAppsrogergargantuasources dk_contentcstrikemapsrcze_escape_the_eye_v1"

Valve Software - vbsp.exe (Dec 11 2006)
2 threads
materialPath: c:program filesvalvesteamsteamappsrogergargantuacounter-strike sourcecstrikematerials
Loading C:Program FilesValveSteamSteamAppsrogergargantuasources dk_contentcstrikemapsrcze_escape_the_eye_v1.vmf
Can't find surfaceprop panel for material METAL/PRODVENTA, using default
Can't find surfaceprop stone for material DE_TIDES/TIDES_FLOOR_STONE_1, using default
fixing up env_cubemap materials on brush sides...
ProcessBlock_Thread: 0...1...2...3...4...5...6...7...8...9...10 (0)
ProcessBlock_Thread: 0...1...2...3...4...5...6...7...8...9...10 (0)
Processing areas...done (0)
Building Faces...done (0)
Chop Details...done (0)
Find Visible Detail Sides...
Merged 250 detail faces...done (0)
Merging details...done (0)
FixTjuncs...
PruneNodes...
WriteBSP...
NODRAW on terrain surface!
NODRAW on terrain surface!
done (1)
writing C:Program FilesValveSteamSteamAppsrogergargantuasources dk_contentcstrikemapsrcze_escape_the_eye_v1.prt ...done (0)
Creating default cubemaps for env_cubemap using skybox materials:
skybox/militia_hdr*.vmt
Run buildcubemaps in the engine to get the correct cube maps.

Creating default HDR cubemaps for env_cubemap using skybox materials:
skybox/militia_hdr*.vmt
Run buildcubemaps in the engine to get the correct cube maps.

Finding displacement neighbors...
Found a displacement edge abutting multiple other edges.
Finding lightmap sample positions...
Displacement Alpha : 0...1...2...3...4...5...6...7...8...9...10
Building Physics collision data...
done (0) (329136 bytes)
Placing detail props : 0...1...2.Material NATURE/ROCKS_RED_GRASS uses unknown detail object type rocks_redgrass!
Material NATURE/ROCKS_RED_GRASS uses unknown detail object type rocks_redgrass!
Material NATURE/ROCKS_RED_GRASS uses unknown detail object type rocks_redgrass!
3Material NATURE/ROCKS_RED_GRASS uses unknown detail object type rocks_redgrass!
Material NATURE/ROCKS_RED_GRASS uses unknown detail object type rocks_redgrass!
Material NATURE/ROCKS_RED_GRASS uses unknown detail object type rocks_redgrass!
.4Material NATURE/ROCKS_RED_GRASS uses unknown detail object type rocks_redgrass!
Material NATURE/ROCKS_RED_GRASS uses unknown detail object type rocks_redgrass!
Material NATURE/ROCKS_RED_GRASS uses unknown detail object type rocks_redgrass!
...5...6...7...8.Material NATURE/ROCKS_RED_GRASS uses unknown detail object type rocks_redgrass!
Material NATURE/ROCKS_RED_GRASS uses unknown detail object type rocks_redgrass!
Material NATURE/ROCKS_RED_GRASS uses unknown detail object type rocks_redgrass!
Material NATURE/ROCKS_RED_GRASS uses unknown detail object type rocks_redgrass!
9...Material NATURE/ROCKS_RED_GRASS uses unknown detail object type rocks_redgrass!
Material NATURE/ROCKS_RED_GRASS uses unknown detail object type rocks_redgrass!
Material NATURE/ROCKS_RED_GRASS uses unknown detail object type rocks_redgrass!
Material NATURE/ROCKS_RED_GRASS uses unknown detail object type rocks_redgrass!
10
Compacting texture/material tables...
Reduced 1687 texinfos to 1055
Reduced 141 texdatas to 117 (4755 bytes to 3732)
Writing C:Program FilesValveSteamSteamAppsrogergargantuasources dk_contentcstrikemapsrcze_escape_the_eye_v1.bsp
9 seconds elapsed

** Executing...
** Command: "c:program filesvalvesteamsteamappsrogergargantuasources dkbinep1binvvis.exe"
** Parameters: -game "c:program filesvalvesteamsteamappsrogergargantuacounter-strike sourcecstrike" -fast "C:Program FilesValveSteamSteamAppsrogergargantuasources dk_contentcstrikemapsrcze_escape_the_eye_v1"

Valve Software - vvis.exe (Nov 8 2007)
fastvis = true
2 threads
reading c:program filesvalvesteamsteamappsrogergargantuasources dk_contentcstrikemapsrcze_escape_the_eye_v1.bsp
reading c:program filesvalvesteamsteamappsrogergargantuasources dk_contentcstrikemapsrcze_escape_the_eye_v1.prt
1328 portalclusters
4443 numportals
BasePortalVis: 0...1...2...3...4...5...6...7...8...9...10 (2)
Optimized: 115428 visible clusters (0.00%)
Total clusters visible: 1123938
Average clusters visible: 846
Building PAS...
Average clusters audible: 1156
visdatasize:385473 compressed from 446208
writing c:program filesvalvesteamsteamappsrogergargantuasources dk_contentcstrikemapsrcze_escape_the_eye_v1.bsp
2 seconds elapsed

** Executing...
** Command: "c:program filesvalvesteamsteamappsrogergargantuasources dkbinep1binvrad.exe"
** Parameters: -game "c:program filesvalvesteamsteamappsrogergargantuacounter-strike sourcecstrike" -noextra "C:Program FilesValveSteamSteamAppsrogergargantuasources dk_contentcstrikemapsrcze_escape_the_eye_v1"

Valve Software - vrad.exe SSE (Nov 8 2007)
----- Radiosity Simulator ----
2 threads
[Reading texlights from 'lights.rad']
[1 texlights parsed from 'lights.rad']

Loading c:program filesvalvesteamsteamappsrogergargantuasources dk_contentcstrikemapsrcze_escape_the_eye_v1.bsp
5191 faces
1 degenerate faces
1863761 square feet [268381664.00 square inches]
52 displacements
316843 square feet [45625532.00 square inches]
5190 patches before subdivision
94113 patches after subdivision
33 direct lights
BuildFacelights: 0...1...2...3...4...5...6...7...8...9...10 (134)
BuildVisLeafs: 0...1...2...3...4...5...6...7...8...9...10 (95)
transfers 9625981, max 816
transfer lists: 73.4 megs
GatherLight: 0...1...2...3...4...5...6...7...8...9...10 (1)
Bounce #1 added RGB(357047, 296915, 205261)
GatherLight: 0...1...2...3...4...5...6...7...8...9...10 (0)
Bounce #2 added RGB(90548, 69895, 44442)
GatherLight: 0...1...2...3...4...5...6...7...8...9...10 (1)
Bounce #3 added RGB(8304, 5132, 2288)
GatherLight: 0...1...2...3...4...5...6...7...8...9...10 (0)
Bounce #4 added RGB(3223, 1966, 850)
GatherLight: 0...1...2...3...4...5...6...7...8...9...10 (0)
Bounce #5 added RGB(334, 157, 46)
GatherLight: 0...1...2...3...4...5...6...7...8...9...10 (1)
Bounce #6 added RGB(136, 65, 19)
GatherLight: 0...1...2...3...4...5...6...7...8...9...10 (0)
Bounce #7 added RGB(16, 6, 1)
GatherLight: 0...1...2...3...4...5...6...7...8...9...10 (1)
Bounce #8 added RGB(6, 2, 0)
GatherLight: 0...1...2...3...4...5...6...7...8...9...10 (0)
Bounce #9 added RGB(1, 0, 0)
Build Patch/Sample Hash Table(s).....Done<0.0747 sec>
FinalLightFace: 0...1...2...3...4...5...6...7...8...9...10 (5)
FinalLightFace Done
0 of 0 (0% of) surface lights went in leaf ambient cubes.
ComputePerLeafAmbientLighting: 0...1...2...3...4...5...6...7...8...9...10
Ready to Finish

Object names Objects/Maxobjs Memory / Maxmem Fullness
------------ --------------- --------------- --------
models 31/1024 1488/49152 ( 3.0%)
brushes 887/8192 10644/98304 (10.8%)
brushsides 6683/65536 53464/524288 (10.2%)
planes 5474/65536 109480/1310720 ( 8.4%)
vertexes 9739/65536 116868/786432 (14.9%)
nodes 2549/65536 81568/2097152 ( 3.9%)
texinfos 1055/12288 75960/884736 ( 8.6%)
texdata 117/2048 3744/65536 ( 5.7%)
dispinfos 52/0 9152/0 ( 0.0%)
disp_verts 3636/0 72720/0 ( 0.0%)
disp_tris 5696/0 11392/0 ( 0.0%)
disp_lmsamples 377732/0 377732/0 ( 0.0%)
faces 5191/65536 290696/3670016 ( 7.9%)
hdr faces 0/65536 0/3670016 ( 0.0%)
origfaces 2885/65536 161560/3670016 ( 4.4%)
leaves 2581/65536 82592/2097152 ( 3.9%)
leaffaces 6644/65536 13288/131072 (10.1%)
leafbrushes 2091/65536 4182/131072 ( 3.2%)
areas 2/256 16/2048 ( 0.8%)
surfedges 35542/512000 142168/2048000 ( 6.9%)
edges 21375/256000 85500/1024000 ( 8.3%)
LDR worldlights 33/8192 2904/720896 ( 0.4%)
HDR worldlights 0/8192 0/720896 ( 0.0%)
waterstrips 421/32768 4210/327680 ( 1.3%)
waterverts 0/65536 0/786432 ( 0.0%)
waterindices 7011/65536 14022/131072 (10.7%)
cubemapsamples 6/1024 96/16384 ( 0.6%)
overlays 0/512 0/180224 ( 0.0%)
LDR lightdata [variable] 6223288/0 ( 0.0%)
HDR lightdata [variable] 0/0 ( 0.0%)
visdata [variable] 385473/16777216 ( 2.3%)
entdata [variable] 86972/393216 (22.1%)
LDR leaf ambient 2581/65536 61944/1572864 ( 3.9%)
HDR leaf ambient 0/65536 0/1572864 ( 0.0%)
occluders 0/0 0/0 ( 0.0%)
occluder polygons 0/0 0/0 ( 0.0%)
occluder vert ind 0/0 0/0 ( 0.0%)
detail props [variable] 1/12 ( 8.3%)
static props [variable] 1/21214 ( 0.0%)
pakfile [variable] 620487/0 ( 0.0%)

Level flags = 0

Win32 Specific Data:
physics [variable] 329136/4194304 ( 7.8%)
==== Total Win32 BSP file data space used: 9432748 bytes ====

Total triangle count: 13774
Writing c:program filesvalvesteamsteamappsrogergargantuasources dk_contentcstrikemapsrcze_escape_the_eye_v1.bsp
4 minutes, 0 seconds elapsed

** Executing...
** Command: Copy File
** Parameters: "C:Program FilesValveSteamSteamAppsrogergargantuasources dk_contentcstrikemapsrcze_escape_the_eye_v1.bsp " "c:program filesvalvesteamsteamappsrogergargantuacounter-strike sourcecstrikemapsze_escape_the_eye_v1.bsp"


The NODRAW error in compile is because of a mountain I made and I will fix this in time. I accidently slammed a NODRAW texture on a displacements. It always gives errors but it works nonetheless and never gave me any probs in maps. So ignore that one cuz that will be fixed later.

Anyone got a clue about whats going on with the crash? I hope the condump001.txt give some of you a clue of what to do.

- GARGANTUA



Quote
 Re: CS:S crashes after I try to load my map
Posted by Le Chief on Thu Feb 12th at 10:08pm 2009

Hmm, you could always upload the map somewhere and let us try it on our machines. If Counter-Strike crashes on our machines than there is something wrong with the map, it it doesn't than its something on your end.


Aaron's Stuff



Quote
 Re: CS:S crashes after I try to load my map
Posted by Riven on Fri Feb 13th at 11:59pm 2009

Moved to HL2 Editing since This is for Source not Half-Life 1.

*pulls up trousers* Welp, another thread re-adjusted, ahh. smiley smiley


Blog: www.playingarchitecture.net
LinkedIn: Eric Lancon
Twitter:@Riven202



Quote
 Re: CS:S crashes after I try to load my map
Posted by Zein on Wed Mar 11th at 5:31am 2009

was that supposed to be Well not welp lol



Quote
 Re: CS:S crashes after I try to load my map
Posted by Riven on Wed Mar 11th at 6:09am 2009

Na, It was meant to be read: 'welp' as in:


Red-Neck



Blog: www.playingarchitecture.net
LinkedIn: Eric Lancon
Twitter:@Riven202



Quote
 Re: CS:S crashes after I try to load my map
Posted by warlord on Fri May 15th at 7:02am 2009

Assisted Answer
"""Valve Software - vvis.exe (Nov 8 2007)
fastvis = true
2 threads
reading c:program filesvalvesteamsteamappsrogergargantuasources dk_contentcstrikemapsrcze_escape_the_eye_v1.bsp """



try compiling it with fastvis turned off.
since using fast vis make sthe game draw the entire map all the time it could be causing overload. so having it turned off might make the difference here


edit: i noticed your other post about fast vis and i assume that this is the map you were mentioning crashed hammer.
but there is no way to really tell when hammer crashes sometimes.
expecially if its on portal flow.
just about everytime i compile a map during which windows reports the compile window as 'not responding" when after a few minutes that goes away and the compile finnishes.
but if you cannot get this map to full vis compile try using the cordon tool and run a full compile, after that back in hammer goto map/load portal file. and it will show you blue lines everywhere.
look for large clusters of them and change some of the shapes making them into details.




1
Post Reply