I have two FGD files for Half-Life. One titled "Half-Life_351" and "Half-Life_352".
One of them lets me see the models for monster entities in WorldCraft but other
entities such as lights are still solid blocks. And the other fgd is the other
way around, entities like lights have icons to tell them apart but monsters are
solid blocks. Is there a way to combine these two fgd files so that I can both
see monsters and entities? That would be cool.
If it helps, here are the fgd files I'm talking about: http://www.mediafire.com/download/gogco97k7kc5l37/Half_Life_expert_FGD_files.rar
1
Re: viewing models and entities in 3D views
Posted by No.2 on Fri Aug 30th at 6:12am 2013
Thank you very much for link to the FDG which allows me to finnaly see shit in HEeitor.
I applied Half-Life_351 fdg to Hammer editor 3.5.1 with this result.
not every model (cycler, mainly the large ones) which i have to say bothers me.
Im not sure why is that you missing some icons but have in mind that not every poses one, some are blocks with writing on them.
Here is link to same exact HE im currently using with that fdg.
http://www.filedropper.com/setuphammer351en_1
Sometime the entityes in 3D view got messed up and turn into block or whatever
Maybe its your case, but it gets all rihgt after reset hammer sooo idk¨
¨
Once again i thank you friend
no.II
Posted by No.2 on Fri Aug 30th at 6:12am 2013
Accepted Answer
hello mateThank you very much for link to the FDG which allows me to finnaly see shit in HEeitor.
I applied Half-Life_351 fdg to Hammer editor 3.5.1 with this result.
not every model (cycler, mainly the large ones) which i have to say bothers me.
Im not sure why is that you missing some icons but have in mind that not every poses one, some are blocks with writing on them.
Here is link to same exact HE im currently using with that fdg.
http://www.filedropper.com/setuphammer351en_1
Sometime the entityes in 3D view got messed up and turn into block or whatever
Maybe its your case, but it gets all rihgt after reset hammer sooo idk¨
¨
Once again i thank you friend
no.II
Let's Rock'n'Roll
Re: viewing models and entities in 3D views
Posted by vissova on Mon Sep 2nd at 11:36am 2013
Posted by vissova on Mon Sep 2nd at 11:36am 2013
Oh, you're very welcome. Glad I could help you.
About the entities in the 3D messing up, that only happens when
you load a new map. It's rather annoying, but at least it works.
About the entities in the 3D messing up, that only happens when
you load a new map. It's rather annoying, but at least it works.
Re: viewing models and entities in 3D views
Posted by No.2 on Mon Sep 2nd at 2:16pm 2013
That means it works now for you? You are able to see monsters and another entityes?
Posted by No.2 on Mon Sep 2nd at 2:16pm 2013
Quoting vissova
About the entities in the 3D messing up, that only happens when
you load a new map. It's rather annoying, but at least it works.
you load a new map. It's rather annoying, but at least it works.
That means it works now for you? You are able to see monsters and another entityes?
Let's Rock'n'Roll
Re: viewing models and entities in 3D views
Posted by vissova on Wed Sep 4th at 1:52pm 2013
Posted by vissova on Wed Sep 4th at 1:52pm 2013
Unfortunately no. I was such informing you that the entities tend to screw up with this FGD when you load a new map. I'm still trying to figure out how to see monsters as well as entities.
Re: viewing models and entities in 3D views
Posted by No.2 on Wed Sep 4th at 11:20pm 2013
What about these pictures posted. This not satisfy you?
Its not going to be better than this
Posted by No.2 on Wed Sep 4th at 11:20pm 2013
Accepted Answer
Quoting vissova
Unfortunately no. I was such informing you that the entities tend to screw up with this FGD when you load a new map. I'm still trying to figure out how to see monsters as well as entities.
What about these pictures posted. This not satisfy you?
Its not going to be better than this
Let's Rock'n'Roll
Re: viewing models and entities in 3D views
Posted by vissova on Thu Sep 5th at 9:55pm 2013
Posted by vissova on Thu Sep 5th at 9:55pm 2013
Oh, yes. It did. But the link you gave me didn't work.
It takes me to http://www.filedropper.com, but removes the "/setuphammer351en_1" string at the end, so I'm unable to download anything.
It takes me to http://www.filedropper.com, but removes the "/setuphammer351en_1" string at the end, so I'm unable to download anything.
Re: viewing models and entities in 3D views
Posted by No.2 on Thu Sep 5th at 10:54pm 2013
hmm yes..fuck im not very good at this, and by this i mean helping people.
The site i uploaded it before is probably time limited .
THIS should do it friend (i hope)
http://www.mediafire.com/?s68a61li1t263lf
In other case ping me (watever that means) on mail
and send it to you
2tontoavaro@gmail.cz
cheers
Posted by No.2 on Thu Sep 5th at 10:54pm 2013
Quoting vissova
Oh, yes. It did. But the link you gave me didn't work.
It takes me to http://www.filedropper.com, but removes the "/setuphammer351en_1" string at the end, so I'm unable to download anything.
It takes me to http://www.filedropper.com, but removes the "/setuphammer351en_1" string at the end, so I'm unable to download anything.
hmm yes..fuck im not very good at this, and by this i mean helping people.
The site i uploaded it before is probably time limited .
THIS should do it friend (i hope)
http://www.mediafire.com/?s68a61li1t263lf
In other case ping me (watever that means) on mail
and send it to you
2tontoavaro@gmail.cz
cheers
Let's Rock'n'Roll
Re: viewing models and entities in 3D views
Posted by vissova on Fri Sep 6th at 4:32am 2013
Posted by vissova on Fri Sep 6th at 4:32am 2013
That worked.
Thanks for the help! Thank you very much.
Thanks for the help! Thank you very much.
Re: viewing models and entities in 3D views
Posted by No.2 on Fri Sep 6th at 7:32pm 2013
Posted by No.2 on Fri Sep 6th at 7:32pm 2013
good, glad can help 2 
Let's Rock'n'Roll
Re: viewing models and entities in 3D views
Posted by vissova on Wed Oct 30th at 4:10am 2013
Posted by vissova on Wed Oct 30th at 4:10am 2013
Long story short, something went wrong with Half-Life so I re-installed
a new copy of the game that I bought. It works perfectly fine and the directory it
was installed in is the same as the last one. But now models aren't showing up
in Hammer. Other entities like lights and such show up but monsters are back to
looking like blue squares.
I don't know what happened. Everything is still the same except for an older
copy of the game, but that shouldn't change anything. The paths are the same, too.
What do.
a new copy of the game that I bought. It works perfectly fine and the directory it
was installed in is the same as the last one. But now models aren't showing up
in Hammer. Other entities like lights and such show up but monsters are back to
looking like blue squares.
I don't know what happened. Everything is still the same except for an older
copy of the game, but that shouldn't change anything. The paths are the same, too.
What do.
Re: viewing models and entities in 3D views
Posted by No.2 on Wed Oct 30th at 8:51am 2013
Posted by No.2 on Wed Oct 30th at 8:51am 2013
hey Vissova
All right.
few steps comes in my mind before i will start bashing my head into the wall.
Be assured you choose correct type of game whne you oppening a map
If you have set more halflife modes Hammer asks you which mode you want to work with.
Also more FDGs can be add for each mode
(for example i use OP4.FDG combined with 351.fdg it allows me to see more)
not sure if it may produce any trouble later
guess not
Change FDG, try different types and come back to that current you send me 351.FDG
( putting it here just to be sure http://www.mediafire.com/download/eyel5r4ssnv7xpf/half-life_351.fgd )
In another folder install new Hammer (use links in this article if u not sure which to install)Make it all new. This combination must work for sure
Maybe something will come to me or someone from existing members of Snark can help
let me know
All right.
few steps comes in my mind before i will start bashing my head into the wall.
Be assured you choose correct type of game whne you oppening a map
If you have set more halflife modes Hammer asks you which mode you want to work with.
Also more FDGs can be add for each mode
(for example i use OP4.FDG combined with 351.fdg it allows me to see more)
not sure if it may produce any trouble later
guess notChange FDG, try different types and come back to that current you send me 351.FDG
( putting it here just to be sure http://www.mediafire.com/download/eyel5r4ssnv7xpf/half-life_351.fgd )
In another folder install new Hammer (use links in this article if u not sure which to install)Make it all new. This combination must work for sure
Maybe something will come to me or someone from existing members of Snark can help
let me know
Let's Rock'n'Roll
Re: viewing models and entities in 3D views
Posted by vissova on Thu Oct 31st at 5:16am 2013
Posted by vissova on Thu Oct 31st at 5:16am 2013
Nah. Combining fgds doesn't work nor does the one you gave me.
I had already tried using a new Hammer editor which did nothing.
I know I'm not giving you much to work with, but I have no idea what could have
gone wrong. The game configuration is the same, the only thing that changed was
the version of the game.
I had already tried using a new Hammer editor which did nothing.
I know I'm not giving you much to work with, but I have no idea what could have
gone wrong. The game configuration is the same, the only thing that changed was
the version of the game.
Re: viewing models and entities in 3D views
Posted by No.2 on Thu Oct 31st at 5:16pm 2013
Posted by No.2 on Thu Oct 31st at 5:16pm 2013
Me neither im sorry
The links presented here make combination that works for me.
Hl version 1.1.2.0
Anyhoe, dont think its substantial
To see or not to see, that is the question and according to my considerable narrow knowledge it is the matter of FDG and HAMMER combination.
http://www.deviantart.com/#/art/This-is-my-Boomstick-410652180?_sid=78553961
Happy Halloween man
The links presented here make combination that works for me.
Hl version 1.1.2.0
Anyhoe, dont think its substantial
To see or not to see, that is the question and according to my considerable narrow knowledge it is the matter of FDG and HAMMER combination.
http://www.deviantart.com/#/art/This-is-my-Boomstick-410652180?_sid=78553961
Happy Halloween man
Let's Rock'n'Roll
Re: viewing models and entities in 3D views
Posted by vissova on Thu Oct 31st at 6:48pm 2013
Posted by vissova on Thu Oct 31st at 6:48pm 2013
Well, I guess it's not that big a problem.
As long as I can see more important things like
light entities and the like, it's all good. I'm
sure I'll get the models to show up eventually.
Happy Halloween to you too
As long as I can see more important things like
light entities and the like, it's all good. I'm
sure I'll get the models to show up eventually.
Happy Halloween to you too
Re: viewing models and entities in 3D views
Posted by vissova on Thu Oct 31st at 10:33pm 2013
Posted by vissova on Thu Oct 31st at 10:33pm 2013
I fixed it!
The model and sprites folders in the Hammer Editor folder had nothing in
them. Putting models in the model folder and sprites in the sprite folder
fixed the issue.
The model and sprites folders in the Hammer Editor folder had nothing in
them. Putting models in the model folder and sprites in the sprite folder
fixed the issue.
Re: viewing models and entities in 3D views
Posted by No.2 on Fri Nov 1st at 10:57am 2013
Posted by No.2 on Fri Nov 1st at 10:57am 2013
[quote=vissova]I fixed it![quote]
superb
I keep that solution in mind for later
Are you working or preparing working on something for HL?
If you have something do not hesitate to show in future.
superb
I keep that solution in mind for later
Are you working or preparing working on something for HL?
If you have something do not hesitate to show in future.
Let's Rock'n'Roll
Re: viewing models and entities in 3D views
Posted by vissova on Fri Nov 1st at 8:25pm 2013
A lot of the time I begin a project, like a mod, but lose interest. But
right now I'm trying to recreate something I saw in a dream. So far it's going
okay.
Posted by vissova on Fri Nov 1st at 8:25pm 2013
Quote
Are you working or preparing working on something for HL?
A lot of the time I begin a project, like a mod, but lose interest. But
right now I'm trying to recreate something I saw in a dream. So far it's going
okay.
1
© Snarkpit.net 2001 - 2023, about us, donate, contact
Snarkpit v6.1.0 created this page in 0.0162 seconds.
Snarkpit v6.1.0 created this page in 0.0162 seconds.