Run Map Error

Hi,

I have been creating a map on Hammer for a couple of
days now and I have never been able to run the map to check it out. I
press F9 and it takes to to the run map screen and I put all the
buttons to normal. I then typed -dev -console in at the top and I
clicked OK. It then came up with the compile process window. After a
few seconds, a fatal error came up that said:

Could not find filesystem dll to load.

I don't know what to do now. I think it has something to do with my
configurations, but I am not sure. If anyone has had this problem or
knows what to do please tell me.

Copy and paste your logfile please.

But without your logfile, I'm guessing it just can't load Half-Life.
Try loading up Half-Life (or whatever mod you're using)
seperately with the parameters "-console -dev", then type "map
[mapname]" in the console to load your map.

Check that everything in Build Programs is set up properly. A logfile would be very useful.

Hi ,

I am getting a problem very alike , Every time I try to convert my .map
file into a .bsp for my counter-strike map I get the erorr:
Filesystem.dll not found. Does anyone know why this is?

Help would be appreiciated.

P.S : This is for counter-strike 1.6 not Counter-Strike: Source

<div class="abouttext">Message submitted 1 minutes after original post:</b></div>
By the way,

Here is the Compile Process Window Log.

** Executing...

** Command: Change Directory

** Parameters: F:\Program Files\Valve\Steam\SteamApps\plaguy50@hotmail.com\counter-strike\cstrike

** Executing...

** Command: Copy File

** Parameters: "F:\Program
Files\Valve\Steam\SteamApps\plaguy50@hotmail.map" "F:\Program
Files\Valve\Steam\SteamApps\plaguy50@hotmail.com\counter-strike\cstrike\maps\plaguy50@hotmail.map"

** Executing...

** Command: H:\PROGRA~1\VALVEH~1\tools\qcsg.exe

** Parameters: "F:\Program Files\Valve\Steam\SteamApps\plaguy50@hotmail.com\counter-strike\cstrike\maps\plaguy50@hotmail"

qcsg.exe v2.8 (Jan 31 2000)

---- qcsg ----

entering F:\Program Files\Valve\Steam\SteamApps\plaguy50@hotmail.com\counter-strike\cstrike\maps\plaguy50@hotmail.map

************ ERROR ************

Token too large on line 9

** Executing...

** Command: H:\PROGRA~1\VALVEH~1\tools\qbsp2.exe

** Parameters: "F:\Program Files\Valve\Steam\SteamApps\plaguy50@hotmail.com\counter-strike\cstrike\maps\plaguy50@hotmail"

qbsp2.exe v2.2 (Dec 28 1998)

---- qbsp2 ----

************ ERROR ************

Can't open F:\Program Files\Valve\Steam\SteamApps\plaguy50@hotmail.p0

** Executing...

** Command: H:\PROGRA~1\VALVEH~1\tools\vis.exe

** Parameters: "F:\Program Files\Valve\Steam\SteamApps\plaguy50@hotmail.com\counter-strike\cstrike\maps\plaguy50@hotmail"

vis.exe v1.3 (Dec 30 1998)

---- vis ----

1 thread(s)

************ ERROR ************

Error opening F:\Program Files\Valve\Steam\SteamApps\plaguy50@hotmail.bsp: No such file or directory

** Executing...

** Command: H:\PROGRA~1\VALVEH~1\tools\qrad.exe

** Parameters: "F:\Program Files\Valve\Steam\SteamApps\plaguy50@hotmail.com\counter-strike\cstrike\maps\plaguy50@hotmail"

qrad.exe v 1.5 (Apr 6 2000)

----- Radiosity ----

1 threads

[Reading texlights from 'H:\PROGRA~1\VALVEH~1\tools\lights.rad']

[1 texlights parsed from 'H:\PROGRA~1\VALVEH~1\tools\lights.rad']

************ ERROR ************

Error opening F:\Program Files\Valve\Steam\SteamApps\plaguy50@hotmail.bsp: No such file or directory

** Executing...

** Command: F:\PROGRA~1\Valve\Steam\STEAMA~1\PLAGUY~1.COM\COUNTE~2\hl.exe

** Parameters: +map "plaguy50@hotmail"

Plaguy50@hotmail.com is my acoc**tname.

I would suggest you begin solving your problems by downloading and using the zoners tools instead of attempting to utilize the stock tools that came with the game disk.

If your problems persist, then post a new log.

---

There is no history until something happens, then there is.

somehow this,

************ ERROR ************
Token too large on line 9

, makes me want to tell you to make sure you don't have any textures with long ass names. i'm not sure why i made that connection, but it's ringing a bell.

do what underdog said first though, because the qtools that you're using are really quite bad compared to zoners.

---

i eat paint

Read the tuts my friend! Or unistall Hammer. Or Half LIfe?

---

I would love to change the world, But they would'nt give me the source code.

i get the same message is says

** Executing...
** Command: Change Directory
** Parameters: C:\Program Files\Valve\Steam\SteamApps\kierandubery\half-life

** Executing...
** Command: Copy File
** Parameters: "C:\Program Files\Valve\Steam\SteamApps\kierandubery\half-life\valve\maps\firstmap.map" "C:\Program Files\Valve\Steam\SteamApps\kierandubery\half-life\valve\maps\firstmap.map"

** Executing...
** Command: C:\PROGRA~1\VALVEH~1\tools\qcsg.exe
** Parameters: "C:\Program Files\Valve\Steam\SteamApps\kierandubery\half-life\valve\maps\firstmap"

qcsg.exe v2.8 (Jan 31 2000)
---- qcsg ----
entering C:\Program Files\Valve\Steam\SteamApps\kierandubery\half-life\valve\maps\firstmap.map

************ ERROR ************
missing '[ in texturedef

** Executing...
** Command: C:\PROGRA~1\VALVEH~1\tools\qbsp2.exe
** Parameters: "C:\Program Files\Valve\Steam\SteamApps\kierandubery\half-life\valve\maps\firstmap"

qbsp2.exe v2.2 (Dec 28 1998)
---- qbsp2 ----

************ ERROR ************
Can't open C:\Program Files\Valve\Steam\SteamApps\kierandubery\half-life\valve\maps\firstmap.p0

** Executing...
** Command: C:\PROGRA~1\VALVEH~1\tools\vis.exe
** Parameters: "C:\Program Files\Valve\Steam\SteamApps\kierandubery\half-life\valve\maps\firstmap"

vis.exe v1.3 (Dec 30 1998)
---- vis ----
1 thread(s)

************ ERROR ************
Error opening C:\Program Files\Valve\Steam\SteamApps\kierandubery\half-life\valve\maps\firstmap.bsp: No such file or directory

** Executing...
** Command: C:\PROGRA~1\VALVEH~1\tools\qrad.exe
** Parameters: "C:\Program Files\Valve\Steam\SteamApps\kierandubery\half-life\valve\maps\firstmap"

qrad.exe v 1.5 (Apr 6 2000)
----- Radiosity ----
1 threads
[Reading texlights from 'C:\PROGRA~1\VALVEH~1\tools\lights.rad']
[1 texlights parsed from 'C:\PROGRA~1\VALVEH~1\tools\lights.rad']

************ ERROR ************
Error opening C:\Program Files\Valve\Steam\SteamApps\kierandubery\half-life\valve\maps\firstmap.bsp: No such file or directory

** Executing...
** Command: C:\PROGRA~1\Valve\Steam\STEAMA~1\KIERAN~1\HALF-L~3\hl.exe
** Parameters: -dev -console +map "firstmap"

1) Use Zoner's compile, tools not the default q tools

2) http://www.slackiller.com/tommy14/errors.htm#texturedef

I cannot believe that a completely different person posted the exact same mistake without even bothering to read the thread beforehand.

The qtool advice was already there and still they use them.

Some people, do not need help mapping. They need help, period.

---

There is no history until something happens, then there is.