 
        
        
         
                                
                
             Half-dude!
 Half-dude! 
                                
                
            instead it's listed inThat's because it probably IS a LAN game. You need to get the (Source) Dedicated Server Tool.
LAN game.
 
                                
                
             Naklajat
                            Naklajat
            
                         
                                
                
             Underdog
                            Underdog
            
                         
                                
                
            MoHAA said:
Tell it to foreward ports 12203-12300 TCP and UDP to the IP address of the computer hosting MOHAA.If you don't know it, open a command prompt on your computer and type ipconfig (This will be the ip address of the computer and no the router, which is what you want). Also the computer needs to have a static IP for port forewarding to be possible. The IP connot be assigned by DHCP. Check windows help to find out how change to static IP. Then type net_ip in MOHAA and make sure it is the address of the computer running MOHAA, or localhost. It shouldn't be the WAN ip of your cable/dsl modem.
If it needs changed, type set net_ip youraddresshere
 
                                
                
             Underdog
                            Underdog
            
                         
                                 
                                
                
             
                                
                
             
                                
                
             Underdog
                            Underdog
            
                         
                                             
                                
                
             
                                
                
            
 
                                
                
             ReNo
                            ReNo
            
                         
                                
                
             
                                 Nickelplate
                            Nickelplate
            
                        half-dude said:RIGHT ON! I'm proud of you, Half-dude! :smile: :smile: :smile:
Yea well I guess it is, last I remember I never said anything disrespectful to you. And in case your memory is that incapable you should remember that I apologised for all misdeeds and we are done with that s**t. Anyway Im not going to continue fighting with you.
 
                                
                
             wil5on
                            wil5on
            
                         
                                
                
             
                                
                
             ReNo
                            ReNo
            
                         
                                 
                                
                
             
                                 
                                
                
             
                                
                
             
                                
                
             
                                
                
             
                                
                
             
                                
                
             
                                 omegaslayer
                            omegaslayer
            
                        Some images in this post have been automatically down-sized, click on them to view the full sized versions:So these are the steam and Blizzard ports that should be open? I ask this because I too use the same programs offten.
Try with a blank username and a password of admin
I have the same model, I'll just take a screenshot of the settings.
Think of this as a little learning experience, like mapping you'll soon
realize how easy it was...after taking the first steps.
[edit] There may already be a password on the router, which would have
been put in by whoever installed it. If absolutely necessary pressing
the reset button on the router erases it I believe. Or ask whoever put
it in for what they put as a password.
After that, make sure it has a non-default password.
<a href="http://members.shaw.ca/gorb/ports.jpg" target="_blank"></a>
 
                                
                
             
                                
                
             
                                
                
             
                                
                
            For god's sake, let it go. We know half-dude has had problems at thisThank you reno.. im glad you said it.
site before, but didn't we just recently try and put it behind us and
let him start again? No need to take little digs at him whenever
possible, especially when under the guise of a helpful post to make him
appear a dick for any sort of retaliation. Underdog - did you see
Crono, AtM, Andrei or Baron make any such comments? Did they serve any
purpose other than to make him feel like an idiot? Stop stirring s**t
where it isn't called for.
 
                                
                
             
                                
                
            Application        Start      End           Protocol     IPAddress        Enable
Steam              1200       1200          UDP          192.168.1.101      X
Steam-B            2700       27015         UDP          192.168.1.101      X 
                                
                
             
                                
                
            Pressing the reset button shouldn't reset the password. However restoring factory defaults should.Actually, I come from a networking background, so to me a router is a
Good
screenshot. Exactly what you need to do (since it's the same router ...
or is it? Where did he say he had a Linksys? I must have missed it).
Gorb,
it doesn't defeat the purpose of the router ... it defeats the purpose
of the firewall within the router (which, on some routers isn't
initially active anyway :sad: ).
The purpose of a router is to simply have something to assign IP
addresses within a network. A HUB doesn't do this, and a switch wont
allow computers to connect to each other.
 
                                
                
             
                                
                
             
                                
                
             satchmo
                            satchmo
            
                         
                                
                
             
                                
                
             wil5on
                            wil5on
            
                         
                                
                
             
                                
                
             
                                
                
             
                                
                
             
                                
                
             
                                
                
             Underdog
                            Underdog
            
                         
                                
                
             
                                
                
             satchmo
                            satchmo
            
                         
                                
                
             ReNo
                            ReNo